LTCLHP
| instruction manual
9
v 1.1
2.4 How to replace the LED1W source
When you receive LED1W source, in the package you will find the following items:
LED1W:
LED source
component
LED
centering tool
allows
to easily position and center
LED1W light source.
2.4.1 Replacement instructions
Follow these steps to properly replace LED1W source.
1
5
2
6
3
4
Turn off LTCLHP and disconnect
the power cable.
Unscrew the LTSCHP module from the
LTCLHP illuminator.
Remove any external spacers.
Unscrew and disconnect the rear
part from the LED support.
Unplug the connector.
Unscrew and remove the old
LED1W source.
Follow steps
1
to
12
of LTSCHP assembly procedure (section
2.2.2) to complete the replacement.
LED1W source
