-
５
-
Two-Groups LED Fluorescence Device Installation Marking Graphs
LED Fluorescence Device Installation Marking Graphs
15 double ended connector wire for mercury lamp box
16 two group LED light box
17 light box power socket
18 external power port
19 LED power box output socket
20 single group LED fluorescence light box
21 output socket of lithium battery power box
22 external power connector
1
）
Take all parts from the package
，
remove the protective package and place it
on the vacant bench.
2
）
Turn fluorescence device and put the protective plate in with the screw, then
tighten it by wrench.
3
）
Then put the device in upright direction, then link the main body connector
with main body bayonet, fasten the microscope with screw.
4
）
Slightly loosen the locking screw ,then connect the tube connector on the
front and the back-tube of the fluorescence mercury power box, fixed with
locking screw.
18
19
Ordinary LED Power Box
16
17
14
15
20
17
21
22
Lithium power source
14
15
