2
ATTENTIONS
1.
Disassembly only by the professionals
The microscope has been adjusted before shipping, Unprofessional-person
should not disassemble and remove any other parts. Disassemble and remove
any other parts will result in equipment damage .
If you have any questions, please contact with manufacturer or local
distributor.
2.
Note the input voltage if
correspond
This instrument designed for wide input voltage (100V~240V,50/60HZ),
applicable to most area. But if the supply voltage exceeds this range, the
instrument will be seriously damaged.
3.
Prevent burns and fire
When using power equipment, bulbs and collecting mirror and other nearby
parts of the set will rise sharply in temperature until it reaches a thermal
equilibrium state. Pay attention to anti-hot logo, they should be careful not be
burn when in use.
Alcohol, gasoline, paper and other flammable materials can’t near the
lamp in case of fire.
4.
Notes on replacing the bulb
Replacement should be based on the identity of the instrument using the same
specifications of the bulb (3.4V/3W LED or G4 12V/20W halogen), otherwise
it may cause equipment damage.
The power supply must be cut off before bulb replacement, the bulb must be
cooled off completely before proceeding! Don’t left fingerprints,dust or oil on
the bulb.
5.
Carry and operation
Power must be cut off before moving. Be careful not to crush your finger
when placed.
This instrument is a precision instrument, and it should be handle with care, severe
shock can cause serious damage to equipment-related parts.
The required available environment for using of the equipment:
Indoor temperature: 0
℃
~ 40
℃
Maximum relative humidity: 85%
High temperature or high humidity may cause mildew, fog or dew of the
optical components, and make the instrument not work.
6.
This eletrical instrument don’t cause electromagnetic interferernce for other
device.
