OPTO 22 SNAP PAC SNAP-IT-PM Series, Руководство по установке

Страница: 6 / 8

SPECIFICATIONS
Form 1698-070427—SNAP PAC SNAP-IT-PM Installation Guide
6
Specifications
The following table lists specifications for SNAP-IT units.
LED Indicators
LEDs for SNAP PAC controllers or brains. LEDs on the top of the SNAP PAC R-series controller or
the SNAP PAC brain show system and communication status and activity. See the controller or brain
user’s guide for details.
LEDs for 4-channel digital I/O modules. In addition to the system LEDs shown on the controller or
brain, numeric LEDs are also provided on each standard digital module to indicate the status of its
points. A lighted LED indicates that the digital point is on. (High-density digital modules do not have
status LEDs.)
LEDs for other modules. LEDs are provided on some other modules, usually to indicate status or
diagnostic information. See the module’s user’s guide for details.
Enclosure
SNAP-IT-PM
(all models) Standard enclosure meets NEMA 3R. NEMA 3 or NEMA 4 is recom-
mended for exterior use. Dimensions: 16.19" W, 18.25" H, 6.57" D
Communications
Protocols SNMP, SMTP, FTP, and Modbus/TCP over TCP/IP, UDP/IP, and PPP
Ethernet Port
10/100 Mbps Fast Ethernet, using Category 5 or superior solid UTP
cable with RJ-45 connector
Serial Port
RS-232. Default rate is 19,200 Kbd; baud rate is soft-selectable from
2400 to 115,200 Kbd.
Other Specifications
Power Supply 100–250 VAC (48 VDC and other options available by special order)
Power Consumption 30 W
Temperature 0° to 60° C operating
Humidity 0–95% humidity, non-condensing