background image

INTRODUCTION

Form 1698-070427—SNAP PAC SNAP-IT-PM Installation Guide

2

Monitor flow, pressure, and leaks in tanks and pipelines

Monitor lights and line voltages on towers

You can easily configure modules and manage devices using any authorized computer and the 
included software. 

All SNAP-IT-PM units can use analog, digital, serial, and special-purpose modules mixed on the same 
rack.

What’s in this Guide?

This brief guide shows you how to insert modules in the unit, connect power, and mount the unit. 
You may also need the following documents, depending on your application. Some of these 
documents are included in the CD that came with the unit. All documents can be found on our 
website, www.opto22.com. The easiest way to find a document is to search on its form number. 

For Help

If you have problems installing or using your SNAP-IT unit and cannot find the help you need in the 
product data sheets or guides, you can contact Opto 22 Product Support.

Phone:

800-TEK-OPTO (835-6786)
951-695-3080
(Hours are Monday through Friday, 
7 a.m. to 5 p.m. Pacific Time)

Fax:

951-695-3017

Email:

[email protected]

Opto 22 website:

www.opto22.com

For this purpose...

Use this document...

Form #

Wire I/O modules or find out module 
specifications

SNAP Digital Input Modules Data Sheet
SNAP Digital Output Modules Data Sheet
SNAP Analog Input Modules Data Sheet
SNAP Isolated Analog Input Modules Data Sheet
SNAP Analog Output Modules Data Sheet
SNAP Serial Communication Module User’s Guide

0773
1144
1065
1182
1066
1191

Assign an IP address and configure I/O 
points and features

PAC Manager User’s Guide

1704

Use and maintain the SNAP PAC 
R-series controller

SNAP PAC R-Series Controllers User’s Guide

1595

Develop control programs to run on the 
R-series controller

PAC Control User’s Guide

PAC Control Command Reference
PAC Control Commands Quick Reference

1700
1701
1703

Develop operator interfaces (HMIs) for 
the system 

PAC Display User’s Guide

1702

Use and maintain the SNAP PAC brain

SNAP PAC Brain User’s Guide

1690

NOTE: Email messages and 
phone calls to Opto 22 
Product Support are 
grouped together and 
answered in the order 
received. 

Содержание SNAP PAC SNAP-IT-PM Series









Отзывы: