CHAPTER 5: SYSTEM MAINTENANCE
SNAP PAC Redundancy Option User’s Guide
57
57
–
latches, min/max data.
–
Turns off digital outputs.
–
Sets analog outputs to zero scale (0 counts).
•
Reset Configuration to Defaults and Reset: Erases the configuration from flash memory (see
above), restarts the controller, and resets points to defaults.
microSD Card.
The following commands are available:
•
Store Configuration to microSD card
•
Erase Configuration from microSD card
•
Erase Firmware from microSD card
•
Erase Strategy microSD card
•
Copy microSD card to Flash
IMPORTANT: Before using the microSD card in your controller, make sure to read the section “Using the
MicroSD Card” in chapter 3 of form 1592, the SNAP PAC S-Series User’s Guide.
To manage a strategy or configuration in memory:
1.
In PAC Redundancy Manager, under Tasks & Tools > Controller Management, click Manage
Memory.
2.
Under Controller, select the controller to manage.
3.
Under Memory Commands, select a command.
