1: INTRODUCTION
SNAP-LCM4 User’s Guide
2
WHAT’S IN THIS GUIDE
This guide includes the following:
•
Chapter 1—Introduction
discusses applications, options, and software for the LCM4.
•
Chapter 2—Quick Start
shows how to install a generic SNAP-LCM4 controller using factory settings.
•
Chapter 3—Jumpers and Communication
gives detailed instructions for changing factory settings.
•
Chapter 4—Troubleshooting
helps solve problems you may encounter.
•
Appendix—Specifications
includes specifications and dimensional drawings, as well as DIN-rail
mounting diagrams and information on cables and power supplies to use with the SNAP-LCM4.
FOR HELP
If you have problems installing or using the SNAP-LCM4 controller and cannot find the help you need in this
guide, contact Opto 22 Product Support.
Phone:
800-TEK-OPTO (800-835-6786 toll-free
in the U.S. and Canada)
951-695-3080
Monday through Friday,
7 a.m. to 5 p.m. Pacific Time
Fax:
951-695-3017
Email:
Opto 22 website:
When calling for technical support, be prepared to provide the following information about your system to
the Product Support engineer:
•
Software and version being used
•
Controller firmware version
•
PC configuration
•
A complete description of your hardware and operating systems, including:
–
jumper configuration
–
accessories installed (such as expansion daughter cards)
–
type of power supply
–
types of I/O units installed
–
third-party devices installed (for example, barcode readers)
•
Specific error messages seen.
NOTE: Email messages and phone calls
to Opto 22 Product Support are
grouped together and answered in the
order received.
