BWS1500 System Installation, Operation & Maintenance
3
The BWS1500 Advanced Membrane Separation System is designed specifically for users that desire the abil
-
ity to customize the TDS (Total Dissolved Solids) level or “Mineral Content” of the treated water. The BWS1500
utilizes a precision multi-turn
Blending Valve
to accomplish this with great accuracy. This system design maxi-
mizes the ability to accurately blend a calculated percentage of the filtered water with the product water exiting
the Membrane, providing an Optimized Water to your equipment with the characteristics that you desire.
Getting To Know Your System
Feed water
Inlet
3/8” Push-To-Connect -
Connect to Water Supply
Valve.
3@ CTO-Q
Pre-Filters
PN: 300-05830
Water Quality Indicator -
Operates momentarily, push purple
button to turn on. Push “IN” button
for the TDS of the water going into
your equipment. Push “OUT” button
for the TDS of the purified water
from the membrane.
Emergency
Bypass Valve -
User can switch from
Optimized Water to
Untreated Water
when needed, by turn-
ing handle horizontal.
Optimized Water Outlet
-
3/8” Push-To-Connect
- Connect to Optimized Water Storage
Tank Inlet
Reject Water Outlet
-
1/4” Push-to-Connect
- Connect to drain per local
regulations.
1
2
3
Storage Tank/RP Return Line
-1/2” gray hose
- Connect to Repressurization Assembly Outlet
Pressurized
Optimized Water to Equipment Outlet
- 1/2” gray hose
- Connect to End User Equipment
Sample Port
- 3/8” Push-to-Connect - Used to flush pre
filters, gather a water sample, measure pro-
duction, or drain water from storage tank.
Blending
Valve
- Allows precise adjust-
ment of optimized water TDS
(mineral content).
120VAC
Power Cord
(Coming from bot-
tom rear of bracket)
- Plug in to standard
wall outlet.
System Status Display & Bypass Switch
- LEDs show state of system. Bypass Switch turns
Processor OFF when system is in Emergency
Bypass.
Underside of Processor:
Reject Flow Control Valve
NOTE: Never close Reject Flow Control Valve nor
limit Reject flow to less than Permeate flow!
Operating Pressure Gauge
Shows feed pressure only when processor is
operating (when level in storage tank is low).
Normal
Operation
Items in green circles show a nor-
mal operating condition/position.
