5
PREPARATION
CONNECTING THE
SPEAKERS
Caution: Do not plug in the power cord
until you connect the speakers. Operat-
ing the CD-3321 without connected
speakers could damage it.
The connecting wires for the CD-3321’s
detachable speakers are rolled up in the
recessed area at the back of each
speaker.
Follow these steps to connect the
speakers to the system.
Note: The right speaker has the tracks
on its left side when viewed from the
front. The left speaker has the tracks on
its right side when viewed from the front.
1. Align the tracks on the side of the
right speaker with the tracks on the
right end of the main system and
slide the speaker down until it clicks
into place.
2. Align the tracks on the side of the
left speaker with the tracks on the
left end of the main system and slide
the speaker down until it clicks into
place.
3. Unwind the wire from each speaker.
4. Press the pair of terminal tabs
marked
SPEAKERS 8
Ω
/+R–
on the
back of the CD-3321. Insert the right
speaker’s red wire into the red (+)
terminal and its black wire into the
black (–) terminal. Then release the
tabs.
Caution: To avoid damaging your
system and speakers, never let the
speaker wires’ bare ends touch
each other.
5. Repeat Step 3 to connect the left
speaker’s wires to the terminals
marked
SPEAKERS 8
Ω
/–L+
.
To disconnect the speakers from the
system, first disconnect the speaker
wires from the CD-3321. Then push in
the mounting tabs on the sides of the
main system and slide the speakers up-
ward along the tracks.
illus
illus
illus
14-546a.fm Page 5 Wednesday, April 7, 1999 6:57 AM