13
• After programming a sequence of
tracks, repeatedly press
PRO-
GRAM
to review the tracks you
have already programmed.
• To edit the programmed
sequence, repeatedly press
PRO-
GRAM
until the desired memory
location appears. Then press
SKIP |
or
|
to find the track
you want and press
PROGRAM
to
store the new track.
6. Press
PLAY/PAUSE
.
PROGRAM
appears and the CD player plays the
tracks in the order you programmed.
Notes:
• Press
STOP
to stop playing the
sequence.
• Press
STOP
,
PROGRAM
, then
PLAY
to start playing the
sequence again from the begin-
ning.
• Use
SKIP |
and
|
to move
through the programmed
sequence during play.
7. To clear the program memory, do
any of the following:
• Press
STOP
, then open the CD
compartment door.
• Press
STOP
, then set
FUNCTION
to a function other than
CD
.
• Press
STOP
, then
POWER
to turn
off the system.
CD AND CD PLAYER
CARE TIPS
Although a CD is very durable, you
should handle it with care. We recom-
mend the following precautions.
• Keep the CD in its protective case or
sleeve when you are not playing it.
• Keep the CD dry. A drop of moisture
can act as a lens and affect the laser
beam’s focus. If it gets wet, wipe the
CD with a soft, dry cloth before play-
ing it.
• Do not write on either side of a CD,
especially the non-label side.
• Keep the CD clean. Handle the CD
by its edge to avoid fingerprints and
surface scratches, which can pre-
vent the laser from accurately read-
ing the CD. To clean the surface, use
a CD Cleaner Kit (such as Cat. No.
42-226) or Scratch ’n Fix (Cat. No.
42-127).
• Do not store CDs in high-tempera-
ture, high-humidity locations.
If the CD-3321 is subjected to a sudden
shock or jolt during play, the CD’s rota-
tion speed might suddenly change, and
the music might be briefly interrupted or
the current track might start over. This is
not a malfunction.
14-546a.fm Page 13 Wednesday, April 7, 1999 6:57 AM