22
CLEANING THE TAPE-
HANDLING PARTS
Dirt, dust, or particles of the tape’s coat-
ing can accumulate on the tape heads
and other parts that the tape touches.
This can greatly reduce the performance
of the CD-3321. Use the following clean-
ing procedure after every 20 hours of
operation.
1. Remove the batteries and discon-
nect any other power source.
2. Open the cassette compartment
door on each deck.
3. Press
PLAY
on each deck to expose
the tape-handling parts.
4. Use a cotton swab dipped in dena-
tured alcohol or tape head cleaning
solution to clean the tape guides,
record/play head, pinch rollers, cap-
stans, and erase heads.
5. When you finish cleaning, press
STOP/EJECT
on each deck and
close the cassette compartment
doors.
Your local RadioShack store sells a
complete line of cassette deck cleaning
supplies.
FCC NOTICE
This system complies with the limits for
a Class B digital device as specified in
Part 15 of
FCC Rules. These limits pro-
vide reasonable protection against ra-
dio and TV interference in a residential
area. However, your equipment might
cause TV or radio interference even
when it is operating properly. To elimi-
nate interference, you can try one or
more of the following corrective mea-
sures:
• Reorient or relocate the receiving
antenna.
• Increase the distance between the
equipment and the radio or TV.
• Use outlets on different electrical cir-
cuits for the equipment and the radio
or TV.
Consult your local RadioShack store if
the problem still exists.
illus
14-546a.fm Page 22 Wednesday, April 7, 1999 6:57 AM