19
• To dub the tape at normal speed,
set
FUNCTION
to
TAPE DUBBING
NORM
.
• To dub the tape at about twice the
normal speed, set
FUNCTION
to
TAPE DUBBING HIGH
. (You will
hear a high-pitched sound during
recording.)
5. Press
PAUSE
, then
RECORD
on
Tape 1.
RECORD
and
PLAY
both lock
down.
6. Press
PLAY
on Tape 2 to begin
recording.
PAUSE
on Tape 1 auto-
matically releases.
Note: To skip an unwanted section
during recording, temporarily stop
recording by pressing
PAUSE
on
Tape 1 while the unwanted section
plays. Tape 1 stops recording but
Tape 2 continues playback. To
resume dubbing, press
PAUSE
on
Tape 1.
7. Press
STOP/EJECT
on Tape 1 to
stop recording.
RECORD
and
PLAY
release.
8. If the tape in Tape 2 did not reach
the end and automatically stop,
press
STOP/EJECT
on Tape 2 to stop
playing the tape.
TAPE TIPS
Erasing a Cassette Tape
If you no longer want a recording, you
can record over it or erase it. To record
over a cassette tape, simply record over
the previous recording. To erase the en-
tire cassette tape, let the tape record to
the end.
You can quickly erase both sides of a
cassette tape using a bulk tape eraser,
available at your local RadioShack
store.
Preventing Accidental Erasure
Cassette tapes have two erase-protec-
tion tabs, one for each side. To protect a
recording from being accidentally re-
corded over or erased, use a screwdriv-
er to remove one or both of the cassette
tape’s erase-protection tabs.
Note: Removing the erase-protection
tabs does not prevent a bulk eraser from
erasing a cassette tape.
illus (make
callouts
bold)
14-546a.fm Page 19 Wednesday, April 7, 1999 6:57 AM