Optimum VAC2, Руководство пользователя

Страница: 12 / 16

Always clean your Optimum VAC2 Vacuum Blender after each use. Doing so will extend its life, and help to
keep bacteria at bay. It will also reduce the chance of staining; and prevent damage to the seals and shaft of
the blades.
TO CLEAN THE BASE:
1. Switch off and unplug the blender from the power outlet.
2. Using a soft, damp cloth, wipe the surface of the blender's base. You can use a mild
detergent to remove dried food if required.
3. Use a dry soft cloth to thoroughly dry the blender.
TO CLEAN THE JUG:
1. After each use, rinse the cups thoroughly with warm soapy water (not hot).
2. Place one or two drops of dish soap in your cups and fill them halfway with warm water.
3. Secure the lid and mount on the base.
4. Start the blender at LOW and slowly increase to HIGH speed.
5. Run on Level 8 for 10-60 seconds (depending on what was blended; thick contents take longer to clean).
6. Pour the contents out and rinse thoroughly.
7. Turn the jug upside down and let air dry.
FOR A DEEP CLEAN, PERFORM THE FOLLOWING STEPS MONTHLY OR AS NEEDED:
Place 2 cups of cool water and 2 cups of white vinegar into the jug and let it soak for between 12 and 24 hours.
Pour the contents out and rinse thoroughly.
Then follow the appropriate cleaning instructions above.
C L E A N I N G A N D M A I N T E N A N C E
O P T I M U M V A C 2 V A C U U M B L E N D E R
1 0