Optimum OPTIturn TX 6222, Руководство по эксплуатации

Страница: 65 / 124

OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.0.1 dated 2017-11-16 Page 65 Translation of the original instructions
DP700 EN
D
P
700_
brie
f-i
n
stru
ct
ion
_
GB.
fm
5.5 DP700 Quick start guide
p
Technical Specification
N
For the complete manual please download from:
http://newall.com , Click technical Support to access the download
page.
Environmental
Operating Temperature Storage Temperature
-10°C to 50°C -20 to 70°C
Environmental Conditions - I P 40 (Stand Alone)
I P 54 ( P anel M ount)
Relative Humidity - maximum 95% for temperature up to 31°C
Disposal
At the end of it’s life, you should dispose of the D P 700 in a safe
manner applicable to electronic goods.
T he case work is suitable for recycling. P lease consult local
regulations on disposal.
Connections
Electrical
E U Directive 73/23/EEC (Low Voltage
Directive)
BS EN 55022:1998 Class B
BS EN 55024:1998
Input to Power Supply Unit (Supplied)
100-240V (47-63Hz)
External switch-mode
O utput voltage 15VDC
Input Voltage to DP700
15-24VDC ±10%
Conforms to Low Voltage Directive
External P S U Input
Note: Newall M easurements Systems reserves the right to change specifications without notice.
Warnings
T he mains supply is connected into a switch mode power supply (separate from your D P 700) via a
detachable supply cord supplied. If another supply cord is used, it must have fitted a C5, 10A,
EAR
T HED mains connector with a cord rated for at least 10A.
If a mains plug is not already fitted to the supply cord or is of the wrong type, then a suitable EAR T HED
plug should be used which complies with the relevant specifications for plugs and socket-outlets.
You can only use the D P 700 with Newall Spherosyn and M icrosyn analogue encoders.
T he power supply must be disconnected before opening the unit and completed by qualified personnel.
T urn off the power by disconnecting the power supply connector, before you connect the encoder(s)
Cabinet equipotential terminal
for grounding to machine
Cable Clamp
Encoder Input
Connection
1,2 or 3 According
to M odel
RS232 O utput