Safety
Version 1.0.9 dated 2019-05-13
Page 43
Translation of the original instructions
GH 10T | GH 15T
GB
GH10T_G
H15T_G
B_1.
fm
OPTIMUM
M A S C H I N E N - G E R M A N Y
®
Check all safety devices
at the beginning of each shift (at continuous operation),
once a week (with the machine in operation),
after every maintenance and repair work.
Check that prohibition, warning and information signs and the labels on the drill bit grinder,
are legible (clean them, if necessary),
are complete (replace if necessary).
INFORMATION
Use the following table for organizing the checks.
1.10
Safety during operation
We specially point out the specific dangers when working with and on the drill bit grinder.
WARNING!
Before switching on the drill bit grinder, make sure that there are,
no dangers generated for persons,
no objects are damaged.
WARNING!
Fire and explosion due to sparks.
Do not operate the drill bit grinder nearby combustible or explosive material.
Avoid any risky working practices:
Make sure that nobody is endangered by your work.
Wear safety goggles.
The instructions mentioned in these operating instructions have to be strictly observed dur-
ing assembly, operation, maintenance and repair.
Do not work on the drill bit grinder, if your concentration is reduced, for example, because
you are taking medication.
Observe the accident prevention regulations issued by your Employers Liability Insurance
Association or other competent supervisory authority, responsible for your company.
Inform the supervisor about all endangerments or errors.
General check
Equipment
Check
OK
Protective covers
Mounted, firmly bolted and not damaged
Signs,
Markings
Installed and legible
Date:
Checked by (signature):
Functional test
Equipment
Check
OK
Position switch
Protective cover
The drill bit grinder must only start if the protective cover is
closed.
Date:
Checked by (signature):
