Optimum OptiGrind GH 10T, Руководство по эксплуатации, Страница: 40 / 74

Safety
Version 1.0.9 dated 2019-05-13 Page 40 Translation of the original instructions
GH 10T | GH 15T GB
GH10T_G
H15T_G
B_1.
fm
OPTIMUM
M A S C H I N E N - G E R M A N Y
®
The machine
is no longer
used as pre-
scribed!
If the drill bit grinder is used in any way other than described above, modified without the
approval of the company Optimum Maschinen Germany GmbH or used in any other way then
the drill bit grinder is being used improperly.
We do not take any liability for damages caused by improper use.
We imperatively point out that due to any
constructive, technical or process control modifications which are not authorized by Optimum
Maschinen Germany GmbH the warranty will also be come null and void.
It is also part of intended use that you

observe the operating values and setting data of the drill bit grinder,

observe the operating instructions,

observe the inspection and maintenance instructions.

"Technical data“ on page 45
1.4 Possible dangers caused by the drill bit grinder
The drill bit grinder is state-of-the-art.
Nevertheless, there is a residual risk as the drill bit grinder operates with

at high speeds,

rotating parts,

with an abrasive wheel (flying sparks)

with electrical voltages and currents.
We have used construction resources and safety techniques to minimize the health risk for the
staff resulting from these hazards.
If the drill bit grinder is used and maintained by the staff who are not duly qualified, there may
be a risk resulting from incorrect or unsuitable maintenance of the drill bit grinder.
INFORMATION
All staff involved in assembly, commissioning, operation and maintenance, must

be duly qualified,

strictly follow these operating instructions.
In the event of intended use

there may be a risk to the persons,

there may be a risk to the drill bit grinder and other material values,

the correct function of the drill bit grinder may be affected.
Always disconnect the mains plug from the socket before performing any cleaning or mainte-
nance works.
1.5 Qualification of the staff
1.5.1 Target group
This manual is addressed to

the operating companies,

the operators,

the staff for maintenance works.
Therefore, the warning notes refer to both, operation and maintenance staff of the drill bit
grinder.
Determine clearly and explicitly who will be responsible for the different activities on the
machine (operation, maintenance and repair).