OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.2.5 dated 2017-03-10
Page 49
Original operating instructions
DH32GSV
GB
ATTENTION!
The tool and/or the drill chuck will fall down. Hold the tool
or the drill chuck while
drifting it out.
ATTENTION!
Do not try to expel the tool when it is in the intermediate position. This might cause
damages of the integrated drill drift or of the feed handle.
With the below described procedure the taper mandrel is being loosened from the drilling spin-
dle.
Move the sleeve as far down until the locking pin
can be moved (Img. 4-10 (b) interme-
diate position).
Move the locking pin
so far, until the locking pin engages completely (Img. 4-10 (c)
expulsion position).
Press the sleeve lever
with a fast and powerful movement upwards.
The taper mandrel is pressed out of the drill spindle.
Img. 4-18: Functional diagram of the drill drift (sectional view)
3
1
1
2
a) home position
b) intermediate position
c) expulsion position