manualshive.com logo in svg

Optimum OPTidrill DH 26GTV, Руководство по эксплуатации, Страница: 48 / 116

Поделиться
Скачать
Optimum OPTidrill DH 26GTV Скачать руководство пользователя страница 48

OPTIMUM

M A S C H I N E N   -   G E R M A N Y

Version 1.2.5  dated 2017-03-10 

Page 48

Original operating instructions

DH32GSV

GB

INFORMATION

The higher the pre-set speed the more rapid is the feed speed on the sleeve. Adjust the correct 
speed depending on the used material and on the drill diameter.

Adjust the drill depth stop 



 "Drill depth stop - DH 32 GSV“ on page  45.

Press the push button in the spindle sleeve lever. The electromagnetic spindle sleeve feed 
is activated.

As soon as the preset drilling depth in the drilling depth stop is attained the micro switch de-
activatesthe drill feed. The drilling sleeve returns to the top position by spring force.

4.16

Disassembly, assembly of drill chucks and drill bits

4.16.1 Use of the quick-action drill chuck

The drill chuck consists of two parts (1 and 2). 

Hold the upper part (No.1) of the drill chuck. With the bottom part of the drill chuck (No. 2) it 
is possible to tighten or loosen the jaws of the quick-action drill chuck. 

Turn the tool (drill) firmly.

Img. 4-16:   Quick-action drill chuck

CAUTION!

Make sure that the clamped tool is firmly and correctly fitted.

4.16.2 Disassembly with integrated drill drift

Img. 4-17:   Removal

Upper part (No. 1) 

quick-action drill 

chuck 

Bottom part (No. 2) 

quick-action drill 

chuck 

Tool (drill)

1

2

3

Содержание OPTidrill DH 26GTV





















































































































Отзывы:

Нет отзывов