OPTIMUM
M A S C H I N E N - G E R M A N Y
Assembly
Version 1.2.5 dated 2017-03-10
Page 26
Original operating instructions
DH26GTV | DH28GSV | DH32GSV
GB
3
Assembly
3.1
Scope of delivery
When the machine is delivered, please check immediately that it has not been damaged during
transport. Compare the scope of delivery with the attached packing list.
3.2
Transport
WARNING!
Severe or fatal injuries may occur if parts of the machine tumble or fall down from the
forklift truck or from the transport vehicle. Follow the instructions and information on
the transport box.
WARNING!
The use of unstable lifting and load suspension equipment that might break under load
can cause severe injuries or even death. Check that the lifting and load suspension gear
has sufficient load-bearing capacity and that it is in perfect condition.
Observe the accident prevention regulations issued by your Employers Liability
Insurance Association or other supervisory authorities applicable to your company.
Fasten the loads carefully.
Never walk under suspended loads!
3.3
Set-up and assembly
3.3.1 Installation site requirements
Organize the working area around the geared drill according to the local safety regulations.
INFORMATION
In order to achieve high levels of functionality and machining accuracy, as well as a long serv-
ice life of the machine, the set-up location should meet certain criteria.
The following points should be noted:
The device must only be installed and operated in a dry and well-ventilated place.
Avoid places close to machines which cause chips or dust.
The installation site must be vibration-free, i.e. located away from presses, planing
machines, etc.
Centres of gravity
Load suspension points
(Marking of the positions for the
load suspension gear)
Prescribed transport position
(Marking of the top surface)
Means of transport to be used
Weights