30
4. APPLYING THE CUFF
a. Place the cuff around a bare wrist 1-2 cm above the wrist joint on the palm side of the wrist.
b. While seated, place the arm with the cuffed wrist in front of your body on a desk or table
with the palm up. If the cuff is correctly placed, you can read the LCD display. If you want to
measure with the right wrist, you should invert the monitor and you will see the inverted
blood pressure value.
c. The cuff must be neither too tight nor too loose.
d. You can also take a measurement on your right wrist as the picture.
Note:
• Please refer to the cuff circumference range in “SPECIFICATIONS” to make sure that the ap-
propriate cuff is used.
• Measuring on same wrist each time.
• Do not move your arm, body, or the monitor during measurement.
• Stay quiet, calm for 5 minutes before blood pressure measurement.
