OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.0.4 dated 2015-11-19
Page 19
Original operating instructions
DRO 5
GB
ATTENTION!
Basically, all connections are protected against external interference. Choose a place of operation that
excludes inductive or capacitive interference influences on the electronic display or its connecting lines.
When mounting the system keep a maximum possible distance from lines loaded with interference. If nec-
essary, provide additional installations including screening shields or metallized housings. Contactor coils
must be wired with spark suppression.
3.2.1 Power supply speed sensor
Power is supplied via the rear jack plug . Connect the sensor for speed measurement from the scope of
delivery with the electronic display.
3.2.2 Pin assignment magnetic sensor
Connect the sensors with electronic display.
Working temperature
0 °C ... +50 °C
Storage temperature
-10 °C ... +60 °C
Humidity
max. 80 %rF
Protection type
IP50
Electrical data
Power supply
Mains connection
21 V to 27 V DC
Current consumption
mains connection
~ 500 mA
System data, resolution and accuracy:
Resolution [mm]
0.001
ǀ
0.002
ǀ
0.005
ǀ
0.01
ǀ
0.05
Connection
speed measurement
Connections
magnetic sensors
Plug type MINI-DIN
(6-pins)
Power supply connection
21V ~ 27V DC / 0.5 amps
