Optimum 3383975 Скачать руководство пользователя страница 2

OPTIMUM

M A S C H I N E N   -   G E R M A N Y

Version 1.0.4  dated 2015-11-19

Page 16

Original operating instructions

DRO 5

GB

Preface

Dear customer,
Thank you very much for purchasing a product made by OPTIMUM. 
OPTIMUM digital displays offer a maximum of quality, technically optimum solutions and convince by an
outstanding price performance ratio. Continuous enhancements and product innovations guarantee state-
of-the-art products and safety at any time. 
Before commissioning please thoroughly read these operating instructions and get familiar with the digital
display. Please also make sure that all persons who operating the digital display have read and understood
the operating instructions beforehand. 
Keep these operating instructions in a safe place nearby the digital display. 
The operating instructions include indications for safety-relevant, proper installation and operation of the
digital display. The continuous observance of all notes included in this manual guarantee the safety of per-
sons and of the digital display. 
The manual determines the intended use of the digital display and includes all necessary information for its
economic operation as well as its long service life. 
The illustration and information included in the present manual can possibly deviate from the current state
of construction of your digital display. Being the manufacturer we are continuously seeking for improve-
ments and renewal of the products. Therefore, changes might be performed without prior notice. The illus-
trations of the digital display may be different from the illustrations in these instructions with regard to a few
details. However, this does not have any influence on the operability of the digital display. 
Therefore, no claims may be derived from the indications and descriptions. Changes and errors are
reserved!
Your suggestion with regard to these operating instructions are an important contribution to optimising our
work which we offer to our customers. For any questions or suggestions for improvement, please do not
hesitate to contact our service department.
If you have any further questions after reading these operating instructions and you are not able to solve
your problem with a help of these operating instructions, please contact your specialised dealer or directly
the company OPTIMUM.
Optimum Maschinen Germany GmbH 
Dr.- Robert - Pfleger - Str. 26 
D-96103 Hallstadt 
Fax  (+49)0951 / 96 555 - 888
Mail:       [email protected]
Internet:   www.optimum-maschinen.de

1

Safety instructions

1.1

Safety and warranty informations

In order to carry out installation correctly, we strongly recommend this document is read very carefully. 
This will ensure your own safety and the operating reliability of the device.

Your device has been quality controlled, tested and is ready for use. Please respect all warnings and 
information which are marked either directly on the device or in this document.

Warranty can only be claimed for components supplied by Optimum Maschinen Germany GmbH. If  dis-
play is used together with other products, the warranty for the complete system is invalid.

Repairs should be carried out only at our works. If any information is missing or unclear, please contact 
Optimum Maschinen Germany GmbH .

Содержание 3383975















Отзывы: