Optimum 3346245, Руководство по эксплуатации

Страница: 22 / 120

Technical specification
Version 1.0.4 - 2020-07-31 22 Translation of the original instructions
MZ4S GB
MZ
4S
_G
B_2.
fm
2.19 Emissions
Measurement in operating conditions in accordance with DIN ISO 8525 with surface areas
Measurement methods in accordance with DIN 45635.
The generation of noise emitted by the machine is 79 dB(A) on no-load running at 80% of max.
spindle speed and activated automatic feed on no-load running at 80% of the possible feed
speed, measured at a distance of one meter from the machine and at a height of 1.6m.
If the milling machine is installed in an area where various machines are in operation, the noise
exposure (immission) on the operator of the milling machine at the working place may exceed
80 dB(A).
INFORMATION
This numerical value was measured on a new machine under the operating conditions specified
by the manufacturer. The noise behaviour of the machine might change depending on the age
and wear of the machine.
Furthermore, the noise emission also depends on production engineering factors, e.g. speed,
material and clamping conditions.

Dimensions, Installation plan on page 24
2.15 Automatic feed - Rapid traverse
Feed [ mm/min ] 50 - 450
Feed axis X │ Z │ Y
Rapid traverse rate [ mm/min ] 780
2.16 Coolant equipment
Power of the cooling lubricant pump [ W ] 100
Delivery volume [ L / min ] 25
Capacity cooling lubricant tank [ L ] 42
Delivery height [ meter ] 3
2.17 Central lubrication
Supply of lubrication points automatic
Tank capacity 2
Interval of time infinitely adjustable
2.18 Environmental conditions
Temperature 19 - 21 °C (for an optimum milling result)
permissible range + 10° to + 35°C
Admissible relative humidity 5...90 % no condensation
30% to 90% at 35°C
90 % at 21°C
Compressed air 700...1060 hPa
Environmental conditions - storage 5 ~ 45 °C