Optimum 3338131, Руководство по эксплуатации

Страница: 34 / 72

Version 2.5.1 - 2020-07-28 34 Translation of original instructions
MH20V | MH20VL | MH20VLD GB
MH
20
V_G
B
_4
.f
m
4.12 Swivelling the milling head
The milling head can be swivelled to the right and to the left.

Loosen the fastening screw on the milling head.

Turn the drill-mill head to the desired position.

Retighten the fastening screw.
INFORMATION
The milling head should be aligned after resetting to the initial position with a dial indicator so
that holes can be produced with the spindle sleeve at a right angle.
Set the zero degree angle step using your set-up.
Img.4-3: Swivelling the milling head
4.13 Manual spindle sleeve feed with the fine feed

Turn the handle screw in order
to activate fine feed.

Turn the spindle sleeve fine
feed in order to move the spin-
dle sleeve.
ATTENTION!
Damage to the mechanics.
Always deactivate the fine feed
when working with the quill
lever.
Img.4-4: Fine feed
A
B
Zero degree angle step
Clamping screw
Quill lever
Fine feed for spindle sleeve
Handle screw