Optimum 3336090, Руководство по эксплуатации, Страница: 51 / 110

Operation
Version 1.0.4 - 2020-08-04 51 Translation of original instruction
DPA21 EN
D
P
A
2
1_
G
B
_3
.f
m
5.9 Arc
Creates an arc in a coordinate system such that processes can be carried out on said arc.

The parameters are displayed in the Rotation Speed field.

The last entered value of each parameter is shown in the row of the X axis.

Entering a new value is specified in the row of the Y axis.
5.9.1 Entering the parameters
Parameter Description
1 - 1 ACE Midpoint of the arc on the coordinate plane: X-Y
2 - 1 ACE Midpoint of the arc on the coordinate plane: Y-Z
3 - 1 ACE Midpoint of the arc on the coordinate plane: X-Z
Press the key to select X-Y, Y-Z or X-Z as the coordinate plane.
To enter the end midpoint of the arc, use the numeric keys
and confirm with the key.
Parameter Description
1 - 2 5E_d Radius of the arc on the coordinate plane: X-Y
2 - 2 5E_d Radius of the arc on the coordinate plane: Y-Z
3 - 2 5E_d Radius of the arc on the coordinate plane: X-Z
To enter the end radius of the arc, use the numeric keys
and confirm with the key.