Optimum 3336090, Руководство по эксплуатации

Страница: 35 / 110

Operation
Version 1.0.4 - 2020-08-04 35 Translation of original instruction
MT60 EN
MT
60_GB
_4.
fm
4.10.3 Switching on the rapid taverse
ATTENTION!
The rapid traverse is used exclusively to reach a position quick. The rapid traverse must
not be used as milling feed.

Set the selection lever for the table feed into the position.
Img.4-7: Selector lever

Loosen clamping lever on the cross table.

In this context, absolutely pay attention that the clamping nuts of the adjustable end stop
switch are well tightened.

Turn the direction lever for table feed motion (X axis) to the required feed direction.
Img.4-8: Direction lever

In order to switch off the rapid traverse, turn the direction lever for table feed motion to the
neutral position.
1
1
2
3
"Rapid traverse" position
Neutral position
"Milling feed" position
Selection lever
1
2
3
Mechanical end position stop
Direction lever