Installation and function
Version 1.1.2 - 2022-02-24
67
Translation of original instruction
S 131 GH
EN
S131
GH_GB
_4.
fm
4
Installation and function
With the metal band saw you can saw different materials.
A change of speed of the saw belt is performed by switching on the control panel.
There are three speed levels available, which allow a wide range of material for sawing.
The saw arch of the metal band saw OPTI S131 GH can be turned from -45° to 60° in order to
allow angular sawing.
A hydraulic cylinder with manually adjustable feed regulation valve serves to adjust the feed of
the saw arch.
The tension of the saw belt is adjusted with the handwheel.
4.1
Hydraulic feed
The lowering speed of the saw arch is performed by a hydraulic cylinder.
4.2
Saw belt guide
The adjustable saw belt guiding serves to
readjust the clearance when sawing
workpieces of little dimensions.
Img.4-1:
Saw belt guide
ATTENTION!
An unnecessarily wide space between the work piece and the saw belt guide, in
combination with a high feed rate very quickly causes the saw belt to wear down.
4.3
Machine vice
The machine vice serves as clamping
device for the workpiece.
The machine vice consists of
the working table,
the clamping jaws,
the handle,
the clamping lever.
Img.4-2:
Machine vice
Saw belt guide
Clamping lever
Handle
Clamping jaws