Technical specification
Version 1.1.2 - 2022-02-24
59
Translation of original instruction
S 131 GH
EN
S131
GH_GB
_2.
fm
Emissions
The generation of noise emitted by the metal band saw is 75 to 80 dB(A). If the metal band saw
is installed in an area where various machines are in operation, the noise exposure (immission)
on the operator of the metal band saw at the working place may exceed 80 dB(A).
INFORMATION
This numerical value was measured on a new machine under the operating conditions specified
by the manufacturer. The noise behaviour of the machine might change depending on the age
and wear of the machine.
Furthermore, the noise emission also depends on production engineering factors, e.g. speed,
material and clamping conditions.
INFORMATION
The specified numerical value represents the emission level and does not necessarily a safe
working level. Though there is a dependency between the degree of the noise emission and the
degree of the noise disturbance it is not possible to use it reliably to determine if further
precaution measures are required or not. The following factors influence the actual degree of
the noise exposure of the operator:
Characteristics of the working area, e.g. size or damping behaviour,
other noise sources, e.g. the number of machines,
other processes taking place in proximity and the period of time, during which the operator
is exposed to the noise.
Furthermore, it is possible that the admissible exposure level might be different from country to
country due to national regulations. This information about the noise emission should, however,
allow the machine operator to evaluate the hazards and risks more easily.
CAUTION!
Depending on the overall noise exposure and the basic threshold values, machine
operators must wear appropriate hearing protection. We generally recommend the use
of noise protection and hearing protection.
2.6
Environmental conditions
Temperature
5-35 °C
Humidity
5 - 80 %
2.7
Operating material
Hydraulic cylinder
Hydraulic oil, viscosity 32 - 46 as per DIN 51519, HLP
Quality
Worm gear
Mobilgear 629, ISO VG 150 or a comparable oil
Spindle of the machine vice
commercial slide bearing grease
Slide bearing
commercial slide bearing grease