manualshive.com logo in svg

Optimum 3111025, Руководство по эксплуатации, Страница: 25 / 168

Поделиться
Скачать
Optimum 3111025 Скачать руководство пользователя страница 25

Version 1.0.2 - 2020-09-15

25

Translation of original instructions

GT25 | GT30 | GT40

EN

GT25_G

T30_G

T40_G

B_3.

fm

The following points should be noted:

The machine must only be installed and operated in a dry and well-ventilated place.

Avoid places near machines generating chips or dust.

The installation site must be free from vibrations also at a distance of presses, planing 
machines, etc.

The ground must be suitable for the surface grinding machine. Make sure that the floor has 
sufficient load-bearing capacity and is level.

The ground must be prepared in such a way that any coolant used cannot penetrate into 
the ground.

Any parts sticking out such as stops, handles, etc. have to be secured by measures taken 
by the customer if necessary in order to avoid endangering persons.

Provide enough space for set-up and operating personnel and material transport.

Also bear in mind accessibility for installation and maintenance works.

INFORMATION

The main switch of the surface grinding machine must be freely accessible.

ATTENTION!

Ensure that only experienced personnel transport, set up and install the machine.

Содержание 3111025









































































































































































Отзывы:

Нет отзывов