Optimum 3034252, Руководство по эксплуатации, Страница: 32 / 84

Operation
Version 1.0.2 - 2020-07-06 32 Translation of original instruction
DH35V EN
DH
35
V
_
G
B
_
4.f
m
4.2.1 Display - Language setting

Press the operation mode button + Stop button to enter the menu.


Turn the speed knob to get to "Change language".


Press the Enter key to confirm the language change.


Select the language with the speed knob.


Confirm the selected language with the Enter key .

4.2.2 Menu Functions

Press the operation mode button + stop button to enter the menu.


Select the desired menu item with the speed knob.

Activate with the stop button.

Clear drill No, press then stop - Sets the number of drilling lever movements for operating
mode drilling to zero.

Clear tap No, press then stop - Sets the number of drilling lever movements for operating
mode tapping to zero.

Mass Unit: inch, press stop button - Changes the unit to inch.

Mass Unit: MM, press stop button - Changes the unit to millimeters.


Change language - Changes the menu language. Function key =
4.3 Tapping / drilling mode
Push button tapping / drilling mode
In the tapping mode the engine automatically starts up according to a predefined path over the
drilling depth display and automatically changes the turning direction as soon as the predefined
depth had been achieved. The screw-tap is drawn out of the workpiece.
The automatic spindle feed in drilling mode is switched off according to a defined path via the
drilling depth display.
4.3.1 Drilling depth / tapping depth
Mechanical drill depth stop
INFORMATION
In normal operation the clamping lever should be clamped in the upper position. If the
clamp lever is in the lowest position, the automatic clutch is deactivated and can not be
used.
The mechanical drill depth stop can be used when drilling several holes with the same depth.
Use the electronic drill depth indicator in conjunction with the clamping lever.

Release the clamping lever of the drill depth.
Clear drill No, press then stop
Clear tap No, press then stop
Mass Unit: inch, press stop button
Mass Unit: MM, press stop button
Change language
+