Safety
Version 1.0.1 - 2020-11-12
5
Translation of original instruction
GU35P
EN
GU35P
_GB
.f
m
WARNING!
Severe injuries due to non-intended use.
It is forbidden to make any modifications or alternations to the operating parameters
values of the polishing machine. They could pose an accident hazard to persons and
cause damage to the polishing machine.
ATTENTION!
If the polishing machine is not used as intended or if the safety directives or the
operating instructions are ignored the liability of the manufacturer for any damages to
personnel or objects resulting hereof is excluded and the claim under guarantee is
becoming null and void!
1.3
Reasonably foreseeable misuse
Any other use other than that specified under "Intended use" or any use beyond the described
use shall be deemed as non-intended use and is not permissible.
Any other use has to be discussed with the manufacturer.
In order to avoid misuse, it is necessary to read and understand the operating instructions
before first commissioning.
Operators must be qualified.
1.3.1
Avoiding misuse
The installation of grinding wheels or drive pulleys to drive other devices is prohibited.
We expressly point out that the guarantee will expire, if any constructive, technical or proce-
dural changes are not performed by the company Optimum Maschinen Germany GmbH.
1.4
Possible dangers caused by the polishing machine
The polishing machine was built using state-of-the-art technology. Nevertheless, there is a
residual risk, as the polishing machine operates with
high speeds,
rotating parts,
electrical voltage and currents,
We have used design and safety engineering to minimize the health risk to personnel resulting
from these hazards.
If the polishing machine is used and maintained by personnel who are not duly qualified, there
may be a risk resulting from its incorrect or unsuitable maintenance.
INFORMATION
Everyone involved in the assembly, commissioning, operation and maintenance must
be duly qualified,
and strictly follow these operating instructions.
Always disconnect the polishing machine from the electrical power supply before changing pol-
ishing wheels, performing cleaning or maintenance tasks.
1.5
Qualification
1.5.1
Target group private users
The machine can be used in the private domain. The understanding of persons in the private
sector with appropriate training has been taken into account in this manual. It is essential that
the private user is aware of the dangers involved in operating this machine. We recommend to
