Safety
Version 1.0.1 - 2020-11-12
6
Translation of original instruction
GU35P
EN
GU35P
_GB
.f
m
attend a training in the use of machine tools. Your specialist dealer can offer you an appropriate
training course. These courses are also offered by adult education centres in Germany.
1.5.2
Obligations of the User
The user must
have read and understood the operating manual,
be familiar with all safety devices and regulations,
be able to operate the polishing machine.
1.5.3
Additional requirements regarding the qualification
Additional requirements apply for work on electrical components or equipment:
They must only be performed by a qualified electrician or person working under the instruc-
tions and supervision of a qualified electrician.
Before starting work on electrical parts or operating agents, the following actions must be taken
in the order given:
disconnect all poles,
secure against restarting,
check that there is no voltage.
1.6
Safety devices
The polishing machine must only be operated with fully functional safety devices.
Stop the polishing machine immediately if there is a failure on the safety device or becomes
ineffective.
It is your responsibility!
If a safety device has been activated or has failed, the polishing machine must only be used if
the cause of the fault has been eliminated,
you have verified that there is no danger to personnel or objects.
The polishing machine features the following safety devices:
A shaft sleeve on each side of the drive shaft as a protective cover.
A restart protection that prevents the unit from restarting independently by connecting the
power supply.
WARNING!
The provided and supplied with the machine shaft sleeves are designed to reduce the
risks of winding up garments or cloths, but not to eliminate them completely. Always
work carefully and observe the limit values of the working process.
1.7
Personal protective equipment
For certain work personal protective equipment is required.
Protect your face and your eyes: Wear a safety helmet with facial protection when perform-
ing work where your face and eyes are exposed to hazards.
Wear protective gloves when handling pieces with sharp edges.
Use safety shoes when you assemble, disassemble or transport heavy components, or
transport the polishing machine.
Use ear protection if the noise level (emission) in the workplace exceeds 80 dB (A).
Before starting work make sure that the required personal protective equipment is available
at the work place.
