Version 1.0.1 - 2020-04-09
9
Montageanleitung
GU 5 | GU 5-H
EN
GU5_G
U5-H_G
B_2.
fm
2
Technical specification
The following information represents the dimensions and indications of weight and the manu-
facturer‘s approved machine data.
GU5 | GU5-H
Emission measurement
The A-evaluated sound pressure level emission L
pA
is 89 to 92 dB. The A-evaluated sound
power level L
WA
is 104 to 107 dB.
CAUTION!
The operator must wear sound and hearing protection.
INFORMATION
This numerical value was measured on a new extraction unit under the operating conditions
specified by the manufacturer. The noise behaviour of the device might change depending on
the age and wear of the device.
Furthermore, the noise emission also depends on production engineering factors, e.g. speed,
material and clamping conditions.
INFORMATION
The mentioned numerical value is the emission level.
Electrical connection
400V ~ 50Hz (~60Hz) CEE 16 A connector,
5-pin supply voltage required.
max. input power of the machine con-
nected at the three-phase connector
4 kW
Load current of the machine con-
nected, minimum
0.5 A
Filter class
L
Blower engine power
1.3 kW
Number of blower fans
1
Blower speed [ rpm
]
29,000 / ~50Hz (34,800 / ~60Hz)
Max. air throughput
2.3 m
3
per minute
Dust container volume
1.8 litres
Exhaust air filter surface
Filament fine filter
0.06 m
2
Weight of the device
50 kg
Dimensions
Dimensions GU5 | GU5-H on page 10
Environmental conditions
can be used at temperatures between 5° and 40° and up to 65 %
relative humidity. A high reduce humidity reduces the extraction
performance of the device.
