Technical data
Version 1.1.3 - 2020-07-21
20
Translation of the original instructions
B34H | B34HV
GB
B34H_B
34HV_
GB_
2
.f
m
2.10
Emissions
The generation of noise emitted by the drilling machine is 76 dB(A) at idle speed according DIN
ISO 8525.
If the drilling machine is installed in an area where various machines are in operation the acou-
stic influence (immission) on the operator of the radial drilling machine may exceed 80 dB(A).
INFORMATION
This numerical value was measured on a new machine under proper operating conditions.
Depending on the age respectively on the wear of the machine it is possible that the noise
behaviour of the machine changes.
Furthermore, the factor of the noise emission is also depending on manufacturing influencing
factors, e.g. speed, material and clamping conditions.
INFORMATION
The mentioned numerical value is the emission level and not necessarily a safe working level.
Though there is a dependency between the degree of the noise emission and the degree of the
noise disturbance it is not possible to use it reliably to determine if further precaution measures
are required or not.
The following factors influence the actual degree of the noise exposure of the operator:
Characteristics of the working area, e.g. size or damping behaviour
,
Other noise sources, e.g. the number of machines,
Other processes taking place in the proximity and the period of time during which the ope-
rator is exposed to the noise.
Furthermore, it is possible that the admissible exposure level might be different from country to
country due to national regulations.
2.6
Required space
B34H
B34HV
Height [mm]
2500
Depth [mm]
1700
Width [mm]
1500
Weight [kg]
260
275
2.7
Speeds
B34H
B34HV
Spindle speeds [ min
-1
]
145 - 4800
40 - 5000
Number of stages
2 x 9
9
2.8
Environmental conditions
B34H
B34HV
Temperature
5 - 35 °C
Relative humidity
25 - 80 %
2.9
Operating material
B34H
B34HV
Toothed rack
commercial lubricating grease
Column, blank steel parts
Acid-free lubricant, e.g. machine oil,
engine oil
Coolant lubricant
UNIMET ASF 192, Mineral 1:10 (approx. 4,5 liters)
