Optics ODM- 88, Руководство пользователя

Страница: 33 / 78

USER MANUAL
DVI MATRIX ROUTER : ODM-88
ODM-88 Manual Page 33

The 2 bytes in EEPROM # represents the Output port number of target
display. For example, 03 in EEPROM 2 represents: load the EDID of
Output 3 display into EEPROM 2. The value, 00 in EEPROM # repre-
sent: no updating to EEPROM.
Example: Sets, Output 1 display

Input 1 EEPROM; Output 3 display

Input 2 EEPROM)
Byte Start Router ID Command Data Length EEPROM 1 EEPROM 2
ASCII * 2 5 5 D 0 1 6 0 1 0 3
Hex 2Ah 32h 35h 35h 44h 30h 31h 36h 30h 31h 30h 33h
EEPROM 3
……..
EEPROM 8 END
0 0
… …
0 0 !
30h 30h
… …
30h 30h 21h

ACK Return Signal:

RX Complete 0x06(06h), TX Complete 0x07(07h)
3.2.13 Default EDID Setting

Restores factory default EDID on EEPROM.

Command line format:

Start (*) + Router ID (3 byte) + Command (B) + Data Length (000) + End (!)

ACK Return Signal:

RX Complete 0x06(06h), TX Complete 0x07(07h)
Byte Start Router ID Command Data Length End
ASCII * 2 5 5 B 0 0 0 !
Hex 2Ah 32h 35h 35h 42h 30h 30h 30h 21h
3.2.14 Baud rate Setting

Change baud rate through RS-232.

Command line format:

Start (*) + Router ID (3 byte) + Command (@) + Data Length (002) + Baud
Rate (variable) + End (!)

The default baud rate is 19,200

Baud rate options:

01 for 19,200bps

02 for 38,400bps