Optics ODM- 88, Руководство пользователя

Страница: 12 / 78

USER MANUAL
DVI MATRIX ROUTER : ODM-88
ODM-88 Manual Page 12
Example Setting
In case of 000 In case of 001 In case of 255

All command codes are required to have the Router ID in its header. For more details,
refer to the command code instruction in Chapter. 3.2.
2.2 Front Panel Interface

All communication with ODM-88 is possible using the front input keys - without video
controller or control PC.

Before pressing control keys, make sure that the LCD display shows USER
MODE .

CREATE, PREVIEW and CANCEL keys are activated by pressing each key
- the activated key is executed by pressing ENTER key.

The FUNCTION has the ability to select multiple features on the ODM-88.

Repeatedly pressing the FUNCTION key will display each feature on the LCD
display.

To save the selected feature, press ENTER - to escape current setting, press
another control key; i.e. CREATE or PREVIEW .
2.3 CREATE Mode

Configures Input-Output connections for cross-switching.
1) Press CREATE button once to activate (orange color LED is on) - LCD will display
the current Input and Output configuration.
2) Select and Press an input key (the respective Green LED is on)
– LCD will display
current configured Output (Red LED is on).
3) Press single or multiple Output buttons to select desired outputs (Red LED is on for
each selected Output button).
4) Outputs can be deselected by pressing the respective Output button (Red LED is off)
5) Press ENTER to save the selected configuration.
6) To configure the next Input to Output or outputs, repeat steps 1 to 5.
2.4 PREVIEW Mode

PREVIEW mode shows current Input-Output configuration.
1) Press PREVIEW to see current Input-Output connection status on the LCD display.
Press any Input button (Green LED is on) to see the current connected Output (indi-
cated by Red LED is on)
To preview status of another Output, press another Input button.
To see the status of all Input-Output connections, press PREVIEW then ENTER .