OPTICOM 4 CHANNELS MPEG-4 DIGITAL VIDEO RECORDER - V 1.2, Инструкция по эксплуатации

Страница: 42 / 69

42
6-2. RECORD
Menu item Description
RESOLUTION
Set resolution to either
704x480(NTSC)/704X576(PAL) or 352x240(NTSC)/352X288(PAL).
CHANNEL
Select the channel for applying the following settings.
FRAME RATE
Set the frame rate for the specified channel.
The sum of the frame rate values from each channel cannot exceed maximum
frame rates for a particular recording resolution.
The maximum frame rate: 120/100fps - 352x240(NTSC)/352X288(PAL)
30/25 fps - 704x480(NTSC)/704X576(PAL)
QUALITY
Select the recording quality for the specified channel.
RECORDING
Assign the recording mode for each channel. Recording modes: Continuous,
Motion, Sensor, Schedule, and Disable.
MOTION ZONE
Select Full Zone or Partial Zone for motion sensing.
MOTION SENSITIVITY
Set the motion sensitivity for the specified channel.
SENSOR TYPE
Set the type of sensor for the specified channel from none,
N/O (normal open), and N/C (normal closed).
PRE RECORD
Enable/disable pre-event recording. Pre-event recording time is 5 sec and
only intra-frames are recorded for pre-event recording.
POST EVENT RECORD
Set post event recording time duration for the specified channel
ALARM
Enable/disable alarm generation for the specified channel.
ALARM DURATION
Set alarm time duration for the specified channel.
AUDIO
Enable/disable audio for the specified channel
SCHEDULE
Set recording schedule.
RESOLUTION
– Select the resolution for the recording using
▶◀
buttons.
352x240: The input video is recorded as 352x240 resolution.
704x480: The input video is recorded as 704x480 resolution.
The resolution setting is applied to every channel.