OPTICOM 4 CHANNELS MPEG-4 DIGITAL VIDEO RECORDER - V 1.2, Инструкция по эксплуатации

Страница: 40 / 69

40
6-1. LIVE
Item Description
OSD
Enable/disable OSD (on-screen-display).
SEQUENCE
Enable/disable sequential display of video channels in full screen mode.
SEQ-DWELL TIME
Dwell time for each cannel display in sequential display mode.
EVENT BEEP
Enable/Disable internal beep when motion is detected or the alarm is triggered.
OSD CONTRAST
Set the visibility level of the On Screen Display (OSD)
CHANNEL
Select the channel for applying the following settings.
DISPLAY
Enable/disable display of the video channel in live display mode
SEQ LIST
Enable/disable the specified channel to be included in sequential display mode.
BRIGHTNESS
Change the brightness value for the specified channel
CONTRAST
Change the contrast value for the specified channel
HUE
Change the hue value for the specified channel
SATURATION
Change the saturation value for the specified channel
VGA SCREEN
MODE
Select VGA screen mode as either FULL or Normal.
NOTE: If the mode is changed, the system will reboot.
ERROR ALARM
Enable/Disable alarm for video loss or HDD fail.
OSD
– Select ON/OFF using
▶◀
buttons.
ON: OSD ((on-screen-display) such as the time, date, the channel, and the characters and symbols
are displayed on the screen.
OFF: OSD ((on-screen-display) is NOT displayed, except recording indicator icons.
SEQUENCE
– Select ON/OFF using
▶◀
buttons.
ON: Channel in full screen mode is rotated.
OFF: Channel on a single live screen is NOT rotated.
SEQ-DWELL TIME
– Select channel sequence interval time using
▶◀
buttons.
Setting values: 1, 2, 3, 4, ~ 56, 57, 58, 60 seconds.
EVENT BEEP
– Select ON/OFF using
▶◀
buttons.
ON: The internal beep sound is triggered when the event is activated.
OFF: The internal beep sound is not triggered.