Optical Systems Design OSD2512 Скачать руководство пользователя страница 215

Страница: 215 / 401

OPTICAL SYSTEMS DESIGN

DOC ID: 10118101

OSD2512 OPERATOR MANUAL

PAGE 215

Type

The policer type of the bandwidth profile. The allowed values are:

MEF

: MEF ingress bandwidth profile.

Single

: Single bucket policer.

Policer Mode

The colour mode of the bandwidth profile. The allowed values are:

Coupled

: Colour-aware mode with coupling enabled.

Aware

: Colour-aware mode with coupling disabled.

Rate Type

The rate type of the bandwidth profile. The allowed values are:

Data

: Specify that this bandwidth profile operates on data rate.

Line

: Specify that this bandwidth profile operates on line rate.

CIR

The Committed Information Rate of the bandwidth profile. The allowed range is from

through

10000000

kilobit per second.

CBS

The Committed Burst Size of the bandwidth profile. The allowed range is from

through

100000

bytes.

EIR

The Excess Information Rate for MEF type bandwidth profile. The allowed range is from

through

10000000

kilobit per second.

EBS

The Excess Burst Size for MEF type bandwidth profile. The allowed range is from

through

100000

bytes.

Buttons

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved

values.

: Refreshes the displayed table starting from the input fields.

: Updates the table, starting with the first entry in the table.

: Updates the table, ending at the entry before the first entry currently displayed.

: Updates the table, starting with the entry after the last entry currently displayed.

: Updates the table, ending at the last entry in the table.

Содержание OSD2512


















































































































































































































































































































































































































Результаты поиска

Содержание OSD2512

Отзывы:

Похожие инструкции для OSD2512

Бренды по названию

Популярные бренды

Optical Systems Design OSD2512, Руководство пользователя

Результаты поиска

Содержание OSD2512

Отзывы:

Похожие инструкции для OSD2512

Бренды по названию

Популярные бренды