Optex ELITE PRO, Инструкция по эксплуатации, Страница: 15 / 24

Preface
Installation
Troubleshooting
Specifications
15
Function settings
Set the OA-607 T and OC-907C T.
For setting, use the dipswitches for each device or the setting app. For more detailed settings, use the setting app.
„
OA-607 T
For setting OA-607 T, use the dipswitch or the setting app.
z
Dipswitch settings
(thick-bordered box): Factory default settings
SW Function Setting
1 Door width 42”/48” 36”
2 Not used OFF
3 Sensitivity Low Normal
4 Immunity ON OFF
5 Not used OFF
6
7
8
NOTE NOTE
1: Dipswitch settings can be switched with conductivity status.
2: When the sensor controller dipswitch #1 (priority setting) is OFF (dipswitch priority), #1 to #8 above are enabled.
3: For detailed setting, set the sensor controller dipswitch #1 (priority setting) to ON (setting app priority) and the sensor controller dipswitch #2
(Wi-Fi setting) to ON (using Wi-Fi communication), and set from the setting app.
„
OC-907C T
For setting OC-907C T, use the dipswitch or the setting app.
Reset switch
2 s press: Reset password (after 2 s, the operation indicator will turn off and return to normal operation).
10 s press: Reset settings to factory defaults (after 10 s, the operation indicator will turn off and return to normal operation).
z
Dipswitch settings
(thick-bordered box): Factory default settings
SW Function Setting
1 Setting priority App Dipsw
2 Wi-Fi ON OFF
3 Knowing act Enable Disable
4 Test output
(Activation)
Enable Disable
5 Mandatory OFF
6
7
8
NOTE NOTE
1: Dipswitch settings can be switched with conductivity status.
2: When the sensor controller dipswitch #1 (priority setting) is OFF (dipswitch priority), #2 to #8 above are enabled.
3: For detailed setting, set this dipswitch #1 (priority setting) to ON (setting app priority) and dipswitch #2 (Wi-Fi setting) to ON (using Wi-Fi
communication), and set from the setting app.