48
5 CHANGING SET VALUE
The set value for the distinction can be changed in detail according to the
condition of the work to be distinguished and the circumstance of the line
where this sensor is attached.
See "Set Items List" ( See Page 52.) for the details of the changeable
set items.
Changing Set Value
1
Cofirm that
PARAMETER
is displayed
in yellow in the standard screen.
(If not, press
or
several
times.)
2
Press
.
Then, the set value reference screen is displayed.
Set item
Set value
3
Display an intended set item
whose data to be changed by
pressing
or
.
PURPLE
: Independent set item for each bank
YELLOW
: Set item common to all banks
BLUE
: Set item being locked
Pressing
and
for 3 seconds or more simultaneously with
the set item displayed will change over Lock / Release condition of
the set value alternately.
Also, Lock / Release condition of all set items can be switched all
at once.
See "Permission to Set Value Initialization (INITIALIZ)" on
Page 56.
Ramco Innovations
www.optex-ramco.com
phone 800-280-6933
