Oppo BDP-80, Руководство пользователя

Страница: 58 / 76

S E T U P M E N U O P T I O N S
52
of audio with high sample rate (up to 192kHz), or 8 channels of audio with standard sample
rate (up to 48kHz). If you play high resolution audio content at the 480p/576p resolution, you
may get reduced audio resolution, incomplete audio channels, or even no audio/video output
at all. Choosing a higher output resolution such as 720p or above allows enough bandwidth
for all high sample rate audio channels.
3.
SACD Output
: To select audio output format for SACD. The options are:
•
PCM
– SACD Direct Stream Digital (DSD) data is converted into multi-channel, high-
resolution PCM data. The converted PCM data is then output through HDMI or the internal
DAC (Digital to Analog Converter) for the analog audio output ports. If you use a receiver
that supports HDMI v1.1 to listen to SACD, or if you use the analog 7.1CH/5.1CH audio
output from the player, please select this option. You may also want to select this option if
you prefer the sound quality of the DSD-to-PCM conversion.
•
DSD
– SACD DSD data is output over HDMI without any conversion. If you use a receiver
that supports HDMI v1.2a with DSD over HDMI, you may select this option. Please note
that when DSD is chosen, audio from SACD playback is only available through the HDMI
output. There is no audio signal from the analog 7.1CH/5.1CH audio output terminals.
4.
HDCD Decoding
: To set the audio decoding option for HDCD (High Definition Compatible
Digital) discs. The options are:
•
On
– HDCD is decoded by the player. User can enjoy expanded dynamic range and
improved audio resolution.
•
Off
– HDCD is treated as regular CD. This is useful when the player is connected to an
HDCD-capable A/V receiver via a digital audio output link (Coaxial, Optical, or HDMI) so the
A/V receiver can perform HDCD decoding.
5.
Coaxial/Optical Output:
To set the output format for the coaxial/optical digital audio output for
use with Dolby Digital and DTS-compatible receivers. The options are:
•
LPCM
– Forces down-mixed 2-channel digital audio output. Choose this setting if your
receiver/amplifier only supports stereo digital (PCM) audio.
•
Bitstream
– Passes audio as compressed bitstream format to the receiver/amplifier.
Choose this setting if your receiver/amplifier is capable of decoding Dolby Digital and/or
DTS.
6.
LPCM Rate Limit:
To set the maximum Linear PCM output frequency for the coaxial/optical
digital output. This menu item is intended to ensure that the audio output is compatible with
equipment that cannot support high sample rates. It sets an upper limit to decide whether the
player shall down-sample audio. The player does not up-sample audio to higher sample rates.
The options are:
•
48K
– Supported by most equipment.
•
96K
– Allows a higher sampling rate and frequency response. It can result in better audio
quality. Ensure that the receiver/amplifier can support it.
•
192K
– Allows the highest sampling rate and frequency response. It can result in the best
audio quality. Ensure that the receiver/amplifier can support it.