Oppo BDP-80, Руководство пользователя

Страница: 36 / 76

A D V A N C E D O P E R A T I O N S
30
The following output resolutions are available:
NTSC output via HDMI:
Auto Æ 1080p(60Hz/24Hz) Æ 1080i 60Hz Æ 720p 60Hz
Æ 480p Æ 480i Æ Source Direct
PAL output via HDMI:
Auto Æ 1080p(50Hz/24Hz) Æ 1080i 50Hz Æ 720p 50Hz
Æ
576p
Æ
576i
Æ
Source Direct
NTSC output via component:
1080p 60Hz* Æ 1080i 60Hz Æ 720p 60Hz Æ 480p Æ 480i
PAL output via component:
1080p 50Hz* Æ 1080i 50Hz Æ 720p 50Hz Æ 576p Æ 576i
* When 1080p is selected for the component output, HDMI output resolution will be 1080p and
component output resolution will be 1080i.
NOTE
•
Some TV sets do not support one or more output resolutions (particularly 1080p). If
an incompatible output resolution is selected, you will get a blank screen or an error
message. In this case please select an output resolution that is supported by the TV.
•
In case you are not able to get a picture using the HDMI or component output, please
connect the player to the TV using the composite video output, then use the Setup
Menu to adjust the player settings.
•
Video up-conversion over the component output is only available for unencrypted
discs such as home video and consumer-created contents. Most commercially
pressed DVD discs are CSS-encrypted and will be limited to 480i/480p resolution.
This restriction applies to the component output only. The HDMI output is protected
with HDCP and has no such restriction.
Zooming and Aspect Ratio Control
ZOOM
This feature zooms in or out of the displayed frame and also changes the
aspect ratio (image width vs. height).
To change the zoom level, press the
ZOOM
button on the remote control.
Each press of the
ZOOM
button will switch the zoom level in the following
sequence:
1:1 (No zooming) Æ H x 1.33 Æ V x 1.33
Æ x1.33 Æ x2 Æ H / 1.33 Æ ½ Æ Back to 1:1 again
NOTE
•
The ZOOM feature may not be available when certain DVD or Blu-ray Discs are played
because the disc author chooses to disable ZOOM.