Biopel MINI - Installation and Operation Instructions
17
The Tower hopper cleaning hole is located on both the left and right side of the hopper. Loosen the 4 screws to remove the
cleaning hole cover. You can reach over the boiler cleaning door through it.
The cleaning door can be removed and the boiler exchanger can then be easily cleaned with either a vacuum cleaner or a
cleaning tool. By lifting the flue gas turbulators and shaking them off, you achieve a near-perfect cleaning of all boiler exchanger
components.
For complete boiler exchanger cleaning, remove the Tower container, empty pellets, and clean the boiler exchanger properly
and completely every now and then.
The intervals for cleaning vary and are influenced by many factors. It is recommended to regularly clean and monitor boiler
exchanger clogging through the cleaning hole. See Chapter 13, Periodic Maintenance, for more information on recommended
cleaning intervals.
1
Cleaning hole cover on
the sides of the Tower
container
The boiler cleaning door can be
removed through the cleaning
opening of the Tower container
Remove the cover
plates and clean the
exchanger
Shake off the turbulators and clean the
boiler exchanger's horizontal surface
