3
E109793#1
INSTRUCTIONS
5. From the square holed metal strip (2) cut two lengths each 9 holes long and bend them as shown in the pattern on page (5)
Mount the metal strips as shown (e) using a machine screw (8) and a nut (11) see abb. (f)
Abb. e
Abb. f
Fix metal strip
here
Add nuts to the ma-
chine screws from
underneath!
Top view
Underne-
ath view
6. Cut fron the square holed metal (2) a strip 8 holes long.
Use the pattern on page (5) to make the "U" shaped axle holder.
Use the machine screw (8) to fit the axle holder fixing it with two nuts (11) from underneath (Abb i)
Abb. g
Abb. h
Top view
Underne-
ath view
Top view
Abb. i
Abb. j
8. Use the remainder of the welding rod and bend it as shown
in the pattern ( page 5) with round nosed pliers.
Axle holder
7. Cut from the welding rod (3) cut 40mm. File the ends to re-
move any burr. Insert the rod in the front axle holder (Abb. j)
Axle
