2
E109793#1
60
45
Ø
3
20
65
15
45
15
45
65
45°135°
22
25
36
INSTRUCTIONS
1. Mark out on the chassis (1) the holes ( See page 5
for patterns ) Drill the 3mm diameter holes and cut
out the shape with a Fretsaw. File the sawn deges to
finish .
2. Use the pattern to fold the chassis (Seite 5). Bend the chassis at 45 degrees using a plastic former ( Heated plastic forming
machine)
Then bend the second fold in the opposite direction.
3. Before asembling the gearbox (6) mount the holed metal strip (2) with screws ( See photo,a) Use the 4th hole of the holed
strip to drill a 3mm hole through the gearbox housing (6) Assemble the the solar gearbox and test !
4. From the holed metal strip (2) cut 2 metal strips each 4 holes long- use metal shears. Bend each piece after 1 hole at 90
degrees . (See pattern on page 5 )
Mount the strips (b) with 2 screws (8) and two nuts (11) on the solar gearbox.
Mount the solar gearbox on the chassis with 2 machine screws (8) &2 nuts(11) /
Abb. b
Abb. c
Screw holed
metal pieces
here
Fix to the top with
nuts
Mount Solar-mo-
tor and gearbox
on the chassis
Underne-
ath view
Top view
General :
The base chassis (1) can be folded or left flat. The instructions show how to fold the chassis.
1
2
3
4
5
6
Abb. a
Abb. d
