1
ø4
ø1,5
117.329
Hand Sander - Wood
Tools Needed
Ruler
Pencil
Please Note!
The Opitec Range of projects is not intended as play toys for young children. They
are teaching aids for young people learning the skills of craft, design and technolo-
gy. These projects should only be undertaken and operated with the guidance of a
fully qualified adult. The finished projects are not suitable to give to children
under 3 years old. Some parts can be swallowed. Danger of suffocation!
Fretsaw or
Scroll Saw
Contents List
Quantity
Size (mm):
Designation:
Part-No.
Wooden Strip
1
200x60x10
Base
1
Plywood
1
200x100x15
Handle
2
Modelling Plywood
1
70x50x1,5
Holder Handle
3
Rod
1
150x4
Fastener Handle
4
Wooden Strip
1
250x15x15
Strips Handle
5
Wooden Ball
1
ø 20
Fastener Handle
6
Foam Rubber
1
29x40
Bottom
7
Tapping Screw
4
Attachment Holder
8
Sandpaper
Drill
Wood Glue
Phillips
Screwdriver
Craft Knife
Adhesive Tape
Scissors
Locking Clamp
General:
The hand sander is designed for a 60 mm sanding belt. If you want to use the abrasive paper cut 280 x 230mm you have to shorten the base plate
and the handle for 2cm. This is pointed out again in the instructions.
