1.4
Connections and Controls
1
2
7
3
4
5
6
Figure
1-2 The IBP-YAG rear panel
1.
Power
Power is supplied to the IBP-YAG from the computer via the LBA-7xx frame grabber card
and the supplied cable.
2.
Video
A standard BNC cable to connect the IBP-YAG to the LBA-7xx frame grabber card.
3.
Cooling Water Inlet
4.
Cooling Water Outlet
These fittings are standard barbed hose connectors for 5/16” ID Hose.
Refer to appendix A for water flow and temperature requirements.
5.
Attenuation – Coarse
6.
Attenuation – Fine
These knobs will increase/decrease the attenuation of the sampled beam.
7.
Purge Gas
Optional dry air / nitrogen purge.
1-4 General
Information
IBP-YAG
