IMP Touchless - Instruction manual
ingo-man
®
plus
9. Pump change
38
Push and hold the pump catch ( key „PUSH“ ) with
the finger and pull out the pump to the front.
Push in the pump from the front side into the intended guidance until
it snaps in. Reclose the face shield.
9.2 Change of the dosage
The dosage of the pump is adjusted to the maximum of
approx. 1.5 ml/stroke. If required the dosage can be reduced
in stages by turning the dosage piece (part of the pump)
up to approx. 0,75 ml/stroke.
For this remove the pump from the dispenser.
10. Exchange of receptacle
• Lift up the empty receptacle from below, draw it to the front
and remove it from the dispenser.
• Insert the filled-up receptacle from below into the dispenser.
Please pay attention to the correct position of the receptacle (see 7.2).
• If neccessary, remove the locking plate before.
• In order to avoid unintentioned pumping actions,
take care that the face shield is opened.