Figure 4-1-6 Edit IAX Endpoint "9001"
Table 4-1-6 Definition of IAX2 Endpoint
Options
Definition
Name
A name which is able to read by human.
And it’s only used for user’s reference.
User name
User name the endpoint will use to authenticate with the gateway
Password
Password the endpoint will use to authenticate with gateway.
Allowed characters
Registration
Whether this endpoint will register to this gateway or this gateway to the endpoint.
Hostname
or IP
Address
IP address or hostname of the endpoint or ‘dynamic’ if the endpoint has a dynamic IP address. This will require registration.
Notice: If the input here is hostname and your DNS has changed, you must reboot asterisk.
Auth
Authentication method for connections
Transfer
Disable or not IAX2 native transfer
Trunk
Use IAX2 trunking with this host
Qualify
Whether or not to check the endpoint’s connection status.
Qualify
Smothing
Use an average of the last two PONG result to reduce falsely detected LAGGED host. The default is ‘no’.
Qualify
Freq Ok
How frequently to ping the peer when everything seems to be OK, in milliseconds.
Qualify
Freq not Ok
How frequently to ping the peer when it’s either;
LAGGED or UNAVAILABLE, in milliseconds.
Port
The port number the gateway will connect to at this endpoint.
Encryption
Enable IAX2 encryption. The default is no.
Force
Encryption
Force encryption insures no connection is established unless both sides support encryption. By turning this option on, encryption
is automatically; turned on as well. The default is no.
Trunk Max
Size
Defaults to 128000 bytes, which supports up to 800; calls of ulaw at 20ms a frame.